11年鋼結構廠房設計施工經驗
1875套鋼構建筑的共同選擇服務咨詢熱線：
0757-81002668
11年鋼結構廠房設計施工經驗
1875套鋼構建筑的共同選擇服務咨詢熱線：
0757-81002668玻璃棉
Glass wool adopts the most advanced centrifugation technique to fiber glass fibrosis, which is made of quartz sand , borax and other raw materials after 1400 ℃ high temperature melting. And then a certain amount of binder is added. Finally, it needs consolidation curing process. Such products has large amount and very thin glass fiber inside. Its total surface area is very large also, so as to strengthen the resistance of the air, making the air unable to flow and eliminating the air convection heat transfer; Similarly, huge friction decays vibration of the sound propagation carriers - air quickly, which ensures glass wool's good thermal insulation and sound absorption effect. It is also good material for sound absorption and noise reduction in steel structure building.
Main performance:
1. Good heat insulation performance under high or low temperature conditions.
2. No burning and produce of harmful gases, identified as "statutory non-combustible material" by countries.
3. Uniform elastic restoring force.
4. Low, intermediate and high frequency sound absorption performance, good noise reduction effect.
5. Small moisture absorption rate in wet or humid conditions.
6. Small linear expansion coefficient.
7. Aging rate is low. It can maintain original performance after long-term use.
8. Good processing performance.
Heat preservation performance comparison of glass wool with other heat preservation material:
The following data is thickness comparison of glass wool felt 12kg/m3-50mm with various same heat insulation effect construction materials.
|
Glass Wool |
Reinforced concrete |
Sand masonry adobe |
Wood (pine, wood grain) |
Flat glass |
|
50mm |
1500mm |
700mm |
180mm |
650mm |
|
Glass wood |
Rock wool |
Polyurethane |
Benzene board | |
|
Thermal insulation properties |
0.035-0.040w/m.k |
0.04-0.45w/m.k |
0.035-0.04w/m.k |
0.004-0.045w/m.k |
|
Fireproof performance |
A class non-combustible, no toxic smoke |
A class non-combustible, no poisonous gas |
B2, easy to produce toxic smoke |
B3, easy to produce poisonous gas |
|
Sound |
Optimal |
Optimal |
NO |
NO |
|
Construction performance |
Light weight, easy site operation |
Heavy, more dust and complex site operation |
Complex site operation |
Easy site operation |
|
Chemical |
Stable, anti-aging and corrosion |
Stable |
not stable, easy aging and corrosion |
soluble in ethyl ether, acetone and other organic solvents |
|
Waterproof performance |
Good waterproof: after drying, water performance and shape remain unchanged |
Poor waterproof, pulverization in water |
General waterproof performance |
Good waterproof performance |
|
Economic performance |
Low cost, good economic performance |
Low cost, high economic performance |
High cost and high price |
High cost and high price |
Above data can prove that glass wool far more better thermal insulation performance than other materials.
Technical parameters
All kinds of technical parameters of glass cotton products:
Steel structure with glass cotton JHY - M10.
Basic parameters:
|
|
Test standard |
Technical parameters |
|
Apparent density |
GB/T5480.3 |
≧10kg/m3 |
|
Fiber mean diameter |
GB/T5480.4 Microscopy way |
≦7.6μm |
|
Shot content |
GB/T5480.5 |
0% |
|
Combustion performance |
GB/8624 BS476 |
Grade A level 0 (non-combustible materials) |
|
Hot load thermal shrinkage temperature |
GB/T11835-1998 |
≧250℃ |
|
Heat conductivity coefficient |
GB/T10294 |
≦0.058w/m.k (Average test temperature) |
|
Hydrophobic rate |
GB/T10299 |
≧98% |
Different thickness heat resistance
|
Thickness mm |
Heat resistance (m2.k/w) |
|
50.0 |
1.0 |
|
75.0 |
1.3 |
|
100.0 |
1.6 |
|
120.0 |
2.0 |
聯系電話
微信號