Storage method of light steel structure

Light steel structure is a very attractive building material. A large number of factories and buildings use light steel structures and other materials. However, the light steel structures used in plant and building construction are stacked. How to store the light steel structures? Next,

How to store light steel structure

1. The steel placed on site can be placed in the open air or stacked in a covered place. When stacking in the open air, the site shall be aligned, higher than the surrounding ground and equipped with drainage ditch; When stacking, try to make the reverse side of the steel plate face up or up to prevent snow and ponding. Both ends shall have a certain height for convenient drainage. When stacked between covers, they can be simply stacked on the floor or wood.

2. How to store light steel structure?? Steel stacking requires proper stacking of antiques to minimize steel deformation and corrosion. When the reinforcement is stacked, the corrugated wood shall be arranged every 5 ~ 6 layers, and the spacing shall not cause obvious bending deformation. The corrugated paper shall be aligned on a uniform vertical plane.

3. The steel identification end of steel shall indicate the certificate number, steel number, number and quality acceptance of the evaluation specification. The end of the steel shall be painted with different colors according to the steel grade, and the steel mark shall be checked regularly.

4. How to store light steel structure? Steel inspection steel must be strictly tested before use, and steel can be scrapped after inspection. The important contents of steel inspection are: the quantity and variety of steel are consistent with the ordering agreement; The quality assurance of steel shall be consistent with the marks printed on steel; Check the size and dimension of steel; Appearance quality inspection of steel.